Pengembangan Teknologi Densifikasi dan Pelengkungan Kayu untuk Meningkatkan Pemanfaatan Jenis-jenis Kayu Kurang Dikenal dan Cepat Tumbuh

Authors

Wahyu Dwianto
Pusat Penelitian Biomaterial LIPI

Keywords:

Teknologi Densifikasi dan Pelengkungan Kayu, Jenis-jenis Kayu Kurang dikenal dan Cepat Tumbuh

Synopsis

Melalui teknologi densifikasi, jenis-jenis kayu kurang dikenal dan cepat tumbuh dapat diolah menjadi produk seperti lantai kayu atau bahan bangunan lainnya, sedangkan melalui teknologi pelengkungan, dapat dijadikan produk mebel berbentuk lengkung, rangka sepeda, dan produk inovatif lainnya. Melalui kerjasama dengan mitra swasta, pemanfaatan jenis-jenis kayu kurang dikenal dan cepat tumbuh tersebut telah dikembangkan menjadi meja dan kursi berbentuk lengkung dan rangka sepeda kayu/Laminated Veneer Lumber (LVL) lengkung. Orasi ini memaparkan tentang pemanfaatan jenis-jenis kayu kurang dikenal dan cepat tumbuh melalui teknologi densifikasi dengan mengembangkan produk akhir seperti lantai kayu dan komponen-komponen bangunan lainnya, sedangkan teknologi pelengkungan kayu/LVL dapat dikembangkan menjadi produk inovatif lainnya dengan inovasi desain-desain baru untuk masa yang akan datang. 

Downloads

Download data is not yet available.

Author Biography

Wahyu Dwianto, Pusat Penelitian Biomaterial LIPI

Menamatkan Sekolah Dasar Dana Pembangunan Nasional
(Dapena) Surabaya tahun 1972, Sekolah Menengah Pertama
Yayasan Perguruan Cikini Jakarta tahun 1975, dan Sekolah Menengah
Atas Yayasan Perguruan Cikini Jakarta tahun 1978/1979.
Memperoleh gelar Sarjana Kehutanan dari Institut Pertanian
Bogor (IPB) tahun 1984, gelar Magister bidang Agriculture dari
Kyoto University tahun 1996, dan gelar Doktor bidang Agriculture
dari Kyoto University tahun 1999.

References

Abdi Z, Prakarsa I. Hutan tanaman industri sebagai langkah tepat

rehabilitasi hutan di Kalimantan Selatan. Kalimantan Selatan: PT

Hutan Rindang Banoa; 2006.

Anonim. Statistik produksi kehutanan. Jakarta: Subdirektorat

Statistik Kehutanan, Badan Pusat Statistik; 2017.

Anonim. Rencana Strategis 2015-2019 Kementerian Lingkungan

Hidup dan Kehutanan. Jakarta: Kementerian Lingkungan Hidup

dan Kehutanan; 2015.

Wahyuni I, Dwianto W, Amin Y, Darmawan T. 2007. Penyusunan

draft data base jenis-jenis kayu di Kebun Raya Cibodas. Prosiding

Seminar Nasional X MAPEKI, Pontianak 2007: 257–263.

Wahyuni I, Dwianto W, Amin Y, Darmawan T. Jenis-jenis pohon

kayu di Kebun Raya Cibodas. Jurnal Ilmu dan Teknologi Hasil

Hutan 2008; 1(2): 93–101.

Dwianto W, Wahyuni I, Amin Y, Darmawan T. Penyusunan draft

data-base jenis-jenis kayu di Kebun Raya Purwodadi. Prosiding

Seminar Nasional X MAPEKI, Pontianak 2007: 783–787.

Dwianto W, Wahyuni I, Amin Y, Darmawan T, Sufiandi S, Suja

IM. Penyusunan data base dan pengukuran riap diameter 27 jenis

kayu di Kebun Raya Eka Karya Bali. Prosiding Seminar Nasional

XI MAPEKI, Palangkaraya 2008: 987–996.

Dwianto W, Wahyuni I, Adi DS. Observasi pemanfaatan jenis

kayu lesser-known di Kebun Raya Bogor untuk kayu konstruksi

melalui analisa data base. Prosiding Seminar Nasional XIII MAPEKI,

Bali 2010: 666–672.

Anonim. Jenis-jenis pohon disusun berdasarkan nama daerah dan

nama botaninya di seluruh Indonesia. Badan Inventarisasi dan

Tata Guna Hutan. Jakarta: Departemen Kehutanan; 1986.

Soerianegara I, Lemmens RHMJ. Plant resources of South-East

Asia No. 5(1). Timber trees: Major commercial timber. Bogor:

Prosea Publisher; 1994.

Lemmens RHMJ, Soerianegara I, Wong WC. 1995. Plant resources

of South-East Asia No. 5(2). Timber trees: minor commercial

timber. Bogor: Prosea Publisher; 1995.

Sosef MSM, Hong LT, Prawirohatmodjo. 1998. Plant Resources

of South-East Asia No. 5(3). Timber trees: Lesser known timber.

Bogor: Prosea Publisher; 1998.

Martawijaya A, Kartasujana I, Kadir K, Prawira SA. Indonesian

wood atlas volume I. Bogor: Forest Products Research and Development

Centre, Agency for Forestry Research and Development,

Depertment of Forestry; 1986.

Martawijaya A, Kartasujana I, Mandang YI, Prawira SA Kadir K.

Atlas kayu Indonesia Jilid II. Bogor: Badan Litbang Kehutanan,

Departemen Kehutanan; 1989.

Abdurrohim S, Mandang YI, Sutisna U. Atlas kayu Indonesia

Jilid III. Bogor: Pusat Penelitian dan Pengembangan Teknologi

Hasil Hutan, Badan Litbang Kehutanan, Departemen Kehutanan;

Mandang YI, Pandit IKN. Pedoman identifikasi jenis kayu di lapangan.

Bogor: Yayasan Prosea dan Pusat Diklat Pegawai SDM

Kehutanan: 2002.

Alrasjid H, Widiarti A. Teknik penanaman dan pemungutan

Gmelina arborea (Yamane). Bogor: Informasi Teknis No. 36, Pusat

Penelitian dan Pengembangan Hutan, Bogor; 1992.

Kasmudjo, Sunarto S. Sifat-sifat kayu Mindi dan peluang penggunaannya.

Prosiding Seminar Nasional II Mapeki. Yogyakarta

: 8–18.

Suwandhi I, Rasyid E, Darwis A, Rosmiati. Penyebaran pohon

Gadog (Bischofia javanica Blume) di Jawa Barat dan uji karakteristik

kayunya (Seri eksplorasi pohon khas dan langka Jawa

Barat). Prosiding Seminar Nasional VII Mapeki. Makassar 2004:

A210–214.

Rachman O, Malik J. Prospek pemanfaatan kayu Cengkeh (Eugenia

aromatica L.) sebagai bahan baku mebel dan barang kerajinan.

Prosiding Seminar Nasional II Mapeki. Yogyakarta 1999:

–131.

Immamudin H, Suryana N, Suhatman A, Hidayat A (editor). An

alphabetical list of plant species cultivated in the Cibodas Botanic

Garden. Cianjur: Indonesian Institute of Sciences Cibodas

Botanic

Garden; 2005.

Soewilo RLP, Astuti IP, Said TD (editor). An alphabetical list

of plant species cultivated in the Purwodadi Botanical Garden.

Purwodadi: Indonesian Institute of Sciences Purwodadi Botanic

Garden; 1999.

Siregar M, Lugrayasa IN, Annasa IBK, Mudiana D. (editor). An

alphabetical list of plant species cultivated in ‘Eka Karya’ Botanic

Garden. Bali: Indonesian Institute of Sciences ‘Eka Karya’ Botanic

Garden; 2004.

Astuti IP, Poernama LS, Said TD, Kosasih RNA. (editor). An

alphabetical list of plant species cultivated in the Bogor Botanical

Garden. Bogor: Indonesian Institute of Sciences Bogor Botanic

Garden; 2001.

Dwianto W, Wahyuni I, Amin Y, Darmawan T, Sudarmanto,

Rustandi.

Riap diameter sepuluh jenis kayu lesser-known di

Kebun Raya Cibodas yang berpeluang untuk bahan baku kayu

konstruksi. Prosiding Seminar Nasional X MAPEKI, Pontianak

: 302–310.

Amin Y, Dwianto W, Wahyuni I, Darmawan T, Sudarmanto. Sifat

fisik mekanik kayu Wangkal (Albizia procera (Roxb.) Benth)

berdasarkan letak ketinggian dalam batang. Prosiding Seminar

Nasional IX MAPEKI, Banjarbaru 2006: 428–436.

Amin Y, Dwianto W, Darmawan T, Wahyuni I, Budiman I. Riap

diameter dan pendugaan volume biomassa beberapa jenis kayu

kurang dikenal (lesser known species) di Kebun Raya Purwodadi,

Pasuruan – Jawa Timur. Prosiding Seminar Nasional XI MAPEKI,

Palangkaraya 2008: 1025–1031.

Amin Y, Wahyuni I, Darmawan T, Dwianto W, Sunarko. Sifat

fisis dan mekanis cabang kayu Schizolobium amazonicum Ducke.

Jurnal Ilmu dan Teknologi Kayu Tropis 2011; 9(2): 182–187.

Dwianto W, Amin Y, Darmawan T, Wahyuni I. Observasi jenis-

jenis kayu cepat tumbuh di Kebun Raya Purwodadi dan Ekakarya

Bali. Jurnal Rimba Kalimantan 2008; 13(2): 74–77.

Dwianto W, Amin Y, Darmawan T, Wahyuni I. Pengaruh perbedaan

tempat tumbuh terhadap riap diameter jenis-jenis kayu di

Kebun Raya Purwodadi dan Eka Karya Bali. Prosiding Seminar

Nasional XI MAPEKI, Palangkaraya 2008: 981–986.

Lestari E, Amin Y, Pramasari DA, Adi DS, Dwianto W. Morfologi

serat beberapa jenis kayu asal pulau Enggano. Prosiding

Seminar Lignoselulosa 2017: 15–19.

Lestari E, Amin Y, Pramasari DA, Dwianto W. Exploration of

potential tree species in Sumba island. Teknologi Indonesia 2018;

(1): 16–23.

Lestari E, Sumarsono A, Nugroho A, Triwibowo D, Amin Y. Eksplorasi

jenis-jenis pohon di Pulau Simeulue. Prosiding Seminar

Lignoselulosa 2018: 61–66.

Adi DS, Amin Y, Darmawan T, Pramasari DA, Dwianto W.

Anatomical

features and fiber characteristics of 2 and 5 years-old

Platinum Teak wood. Proceedings of the 7th International Symposium

Indonesian Wood Research Society, Bandung, Indonesia

: 251–255.

Pramasari DA, Wahyuni I, Adi DS, Amin Y, Darmawan T,

Dwianto W. Effect of age on chemical component of Platinum

Teak wood - A fast growing Teak wood from LIPI. Proceedings

of the Sixth Symposium of Indonesian Wood Research Society,

Medan, Indonesia 2015: 211–216.

Pramasari DA, Lestari E, Bahanawan A, Adi DS, Dwianto W.

Kajian komponen kimia Jati Platinum berdasarkan umur pohon

(II). Prosiding Seminar Nasional XVIII MAPEKI, Bandung

: 190–197.

Lestari E, Pramasari DA, Amin Y, Adi DS, Bahanawan A,

Dwianto

W. The chemical components changes of Platinum Teak

wood. Proceedings of the 6th International Symposium for Sustainable

Humanosphere. Bogor, Indonesia 2016: 165–171.

Adi DS, Sudarmanto, Ismadi, Gopar M, Darmawan T, Amin Y,

Dwianto W, Witjaksono. Evaluation of the wood quality of Platinum

Teak wood, Teknologi Indonesia 2016; 39(1): 36–44.

Prayitno TA. Pertumbuhan dan kualitas kayu. Yogyakarta: Fakultas

Kehutanan UGM; 1994.

Amin Y, Dwianto W, Prianto AH. Sifat mekanik kayu kompresi.

Prosiding Seminar Nasional VII MAPEKI, Makasar 2004: A90–

A95.

Tarmadi D, Amin Y, Prianto AH, Darmawan T, Yusuf S, Dwianto

W. Termite resistance of nine Indonesian and compression wood.

Proceedings of the Sixth International Wood Science Symposium,

Bali, Indonesia 2005: 156–159.

Dwianto W, Subyakto. Fire performance of Albizia compressed

wood using Cone Calorimeter. Proceeding of the Third International

Wood Science Symposium, Kyoto, Japan 2000: 31–36.

Sudiyani Y, Dwianto W. Karakterisasi kayu kompresi setelah

diekspos pada cuaca buatan. Prosiding Seminar Nasional VI MAPEKI,

Bukittinggi 2003: 248–255.

Seborg RM, Millet MA, Stamm AJ. Heat-stabilized compressed

wood (Staypak). Mech. Eng. 1945; 67(1): 25–31.

Stamm AJ. Wood and cellulose science. The Ronald Press Company

; 343–358.

Hamdan S, Dwianto W, Morooka T, Norimoto M. Softening

characteristics of wet wood under quasi-static loading. Holzforchung

; 54(5): 557–560.

Hamdan S, Dwianto W, Morooka T, Norimoto M. Fitting parameters

for softening of wet wood under quasi static loading.

Holzforschung 2004; 58: 134–137.

Dwianto W, Norimoto M, Morooka T, Tanaka F, Inoue M, Liu

Y. Radial compression of Sugi wood (Cryptomeria japonica D.

Don). Holz als Roh- und Werktoff 1998; 56: 403–411.

Dwianto W. Deformasi dinding sel kayu pada proses pengempresan

arah transversal. Prosiding Seminar Nasional X MAPEKI,

Pontianak 2007: 30–33.

Hartono R, Wahyudi I, Febrianto F, Dwianto W. Pengukuran

tingkat pemadatan maksimum batang kelapa sawit. Jurnal Ilmu

dan Teknologi Kayu Tropis 2011; 9(1): 73–83.

Norimoto M, Gril J. Wood bending using microwave heating.

J. Microwave Power and Electromagnetic Energy 1989; 24(4):

–212.

Darwis A, Wahyudi I, Dwianto W. Fixation of Agathis and

Gmelina densified woods at radial direction and observation of

their anatomical structure. Proceedings of the First Symposium

of Indonesian Wood Research Society, Bogor, Indonesia 2009:

–78.

Dwianto W, Yalinkilic MK. Fixation of compressive deformation

of wood by vinyl polymerization. Prosiding Simposium Fisika

Nasional XVIII, Serpong 2000: 73–80.

Hartono R, Febrianto F, Wahyudi I, Dwianto W, Morooka T.

Pengaruh waktu impregnasi dan konsentrasi phenol formaldehyde

terhadap sifat fisis dan mekanis batang kelapa sawit terpadatkan.

Jurnal Ilmu dan Teknologi Hasil Hutan 2010; 3(2): 61–65.

Hartono R, Hidayat W, Wahyudi I, Febrianto F, Dwianto W, Jang

JH, Kim NH. Effect of phenol formaldehyde impregnation on the

physical and mechanical properties of soft inner part of oil palm

trunk. J. Korean Wood Sci. Technol 2016; 44(6): 842–851.

Malik J, Ozarska B, Dwianto W, Santoso A. Effect of impregnation

with polymerized Merbau extractive on density and fixation

of compressed Jabon wood. Proceedings of the Eigth European

Conference on Wood Modification, Helsinki, Finland 2015: 403–

Yalinkilic MK, Dwianto W. A new process for in situ polymerization

of vinyl monomers in wood to delay boron leaching. The

International Research Group on Wood Preservation, Document

No. IRG/WP 98-40110, 1998.

Yalinkilic MK, Dwianto W. Effect of post hot-compression of

boron-treated wood at radial direction on boron leachability.

Proceeding of the Second International Wood Science Seminar

JSPS-LIPI, Serpong, Indonesia 1998: C69–C79.

Yalinkilic MK, Dwianto W. Biological resistance of steam-compressed

wood pretreated with boric compounds. The International

Research Group on Wood Preservation, Document No. IRG/WP

-30190, 1999.

Yalinkilic, MK, Dwianto W, Imamura Y, Tsunoda K, Takahashi

M. Biological resistance of compressed wood pretreated with borates.

The International Research Group on Wood Preservation,

Document No. IRG/WP 99, 1999.

Dwianto W, Subyakto. Fire retardant properties of treated Agathis

wood. Proceedings of the Fourth International Wood Science

Symposium, Serpong – Indonesia 2002: 44–50.

Dwianto W. The permanent fixation of compressive deformation

in wood by heat treatment. Proceeding of the Third Pacific

Rim Bio-Based Composites Symposium, Kyoto, Japan 1996:

–239.

Dwianto W. Permanent fixation of compressive deformation of

Albizia wood (Paraserienthes falcata) by heat treatment. Proceeding

of the First International Wood Science Seminar JSPS-LIPI,

Kyoto, Japan 1996: 46–56.

Dwianto W, Inoue M, Norimoto M. Fixation of compressive

deformation of wood by heat treatment. Journal of the Japan

Wood Research Society 1997; 43(4): 303–309.

Dwianto W, Inoue M, Norimoto M. Permanent fixation of compressive

deformation of Albizia wood (Paraserienthes falcataria)

by heat treatment. Journal of Tropical Forest Products 1998; 4(1):

–67.

Inoue M, Norimoto M, Tanahashi M, Rowell RM. Steam or heat

fixation of compressed wood. Wood Fib. Sci. 1993; 25: 224–235.

Dwianto W, Morooka T, Norimoto M. A method for measuring

viscoelastic properties of wood under high-temperature and

high-pressure steam conditions. Journal of Wood Science 1999;

(5): 373–377.

Shams MI, Yano H, Endou K. Compressive deformation of wood

impregnated with low molecular weight phenol formaldehyde

(PF) resin I: effects of pressing pressure and pressure holding. J

Wood Sci 2004; 50(4): 337?342.

Inoue M, Norimoto M. Permanent fixation of compressive deformation

in wood by heat treatment. Wood Res. and Tech. Notes

; 27: 31–40.

Dwianto W, Tanaka F, Inoue M, Norimoto M. Crystallinity

changes of wood by heat or steam treatment. Wood Research

; 83: 47–49.

Dwianto W, Inoue M, Morooka T, Norimoto M. Mechanism

of permanent fixation of transversal compressed deformation of

wood heat or steam treatment. In: Imamura Y, Umezawa T, Hata

T, editor. Sustainable development and utilization of tropical forest

resources. Kyoto: Kyoto University; 2006. 35–41.

Stamm AJ, Hansen LA. Minimizing wood shrinkage and swelling

effect of heating in various gases. Ind. Eng. Chem. 1937; 29(7):

–833.

Hillis WE, Rozsa AN. The softening temperature of wood. Holzforchung

; 32(2): 68–73.

Dwianto W, Morooka T, Norimoto M. The compressive stress

relaxation of wood during heat treatment. Journal of the Japan

Wood Research Society 1998; 44(6): 403–409.

Hsu WE, Schwald W, Schwald J, Shield JA. Chemical and physical

changes required for producing dimensionally stable woodbased

composites. Wood Sci. Tech. 1988; 22: 281–289.

Ito Y, Tanahashi, M, Shigematsu M, Shinoda Y. Compressive-

molding of wood by high-pressure steam-treatments Part 2.

Mechanism of permanent of fixation. Holzforschung 1998; 52(2):

–221.

Dwianto W, Morooka T, Norimoto M, Kitajima T. Stress relaxation

of Sugi (Cryptomeria japonica D. Don) in radial compression

under high-temperature steam. Holzforschung 1999; 53:

–546.

Dwianto W, Morooka T, Norimoto M. Compressive creep of

wood under high-temperature steam. Holzforchung 2000; 54(1):

–108.

Sudijono, Dwianto W, Yusuf S. Penurunan sifat mekanik kayu

akibat perubahan kadar air dan suhu. Prosiding Seminar Nasional

VI MAPEKI, Bukittinggi 2003: 73–83.

Sudijono, Dwianto W, Yusuf S, Iida I, Furuta Y, Minato K. Characterization

of major, unused and unvalued Indonesian wood

species I. Dependencies of mechanical property on the changes

of moisture content and/or temperature. Journal of Wood Science

; 50: 371–374.

Dwianto W, Sudijono, Yusuf S, Iida I, Minato K. 2005. Hubungan

antara Komposisi Kimia dan Sifat Lentur Statis pada Kondisi

Pelunakan. Prosiding Seminar Nasional VIII MAPEKI, Tenggarong

: A89–A95.

Dwianto W, Prianto AH, Amin Y. 2004. Metode pemilihan jenis

untuk kayu lengkung dengan pembebanan arah sejajar serat pada

kondisi pelunakan. Prosiding Seminar Nasional VII MAPEKI,

Makasar 2004: A143–A152.

Prianto AH, Dwianto W, Amin Y. 2004. Metode pemilihan jenis

untuk kayu lengkung dengan pengujian lentur statis pada kondisi

pelunakan. Prosiding Seminar Nasional VII MAPEKI, Makasar

: A153–A161.

Norimoto M, Ota C, Akitsu H, Yamada T. Permanent fixation

of bending deformation in wood by heat treatment. Wood

Research 1993; 79: 23–33.

Darmawan T, Dwianto W, Amin Y. 2007. Fiksasi kayu lengkung

dengan pemanasan oven. Prosiding Seminar Nasional X MAPEKI,

Pontianak 2007: 207–213.

Makinaga M, Norimoto M, Inoue M. Permanent fixation of bending

deformation of wood by steam treatment. Wood Research

; 84: 39–41.

Dwianto W, Subyakto. Pengamatan kenaikan suhu sebagai ukuran

untuk menentukan kelas ketahanan kayu dan produk panel

kayu terhadap api dengan uji Cone Calorimeter. Prosiding Seminar

Nasional IV MAPEKI, Samarinda 2001: IV 210–214.

Amin Y, Dwianto W. Pengaruh suhu dan tekanan uap air terhadap

fiksasi kayu kompresi dengan menggunakan Close System

Compression. Jurnal Ilmu dan Teknologi Kayu Tropis 2006; 4(2):

–60.

Amin Y, Darmawan T, Dwianto W. Pengaruh perendaman NaOH

terhadap fiksasi kayu kompresi dengan menggunakan Close System

Compression. Prosiding Seminar Nasional X MAPEKI, Pontianak

: 240–247.

Adi DS, Wahyuni I, Amin Y, Darmawan T, Dwianto W. Degradasi

komponen kimia kayu akibat proses densifikasi kayu dengan

metode Close System Compression (CSC). Prosiding Simposium

Nasional Forum Teknologi Hasil Hutan (FTHH), Bogor 2009:

–202.

Adi DS, Darmawan T, Amin Y, Suprapedi, Dwianto W. Optimasi

perlakuan kimiawi pada proses kompresi kayu dengan metode

Close System Compression. Prosiding Seminar Nasional XIII

MAPEKI, Bali 2010: 327–334.

Dwianto W, Darmawan T, Adi DS, Amin Y, Wahyuni I, Fitria,

Karina M. Mechanical properties and chemical changes of Mahoni

wood (Swietenia mahagoni) by Close System Compression

hot press machine. Proceedings of the International Conference

on Innovation in Polymer Science and Technology, Yogyakarta,

Indonesia 2015: 117–123.

Dwianto W, Darmawan T, Fitria, Kusumah SS, Kusmawan D.

Fixation of Talipot Palm (Corypha utan Lamarck) compression

wood. Proceedings of the Fourth International Symposium

for Sustainable Humanosphere, Bandung, Indonesia 2014:

–158.

Hartono R, Wahyudi I, Febrianto F, Dwianto W, Kim NH. Peningkatan

mutu batang kelapa sawit bagian dalam dengan Close

System Compression. Prosiding Seminar Nasional XIV MAPEKI,

Yogyakarta 2011: 80–88.

Hartono R, Wahyudi I, Febrianto F, Dwianto W, Hidayat W, Jang

JH, Lee SH, Park SH, Kim NH. Quality Improvement of Oil Palm

Trunk Properties by Close System Compression Method. J. Korean

Wood Sci. Technol 2016; 44(2): 172–183.

Subiyanto B, Dwianto W, Higashihara T, Morooka T, Norimoto

M. Permanent fixation of radially compressed bamboo in dry condition

by heating and its mechanism. Jurnal Ilmu dan Teknologi

Kayu Tropis 2011; 9(1): 9–18.

Dwianto W, Suprapedi, Darmawan T, Jayadi, Nugroho A, Amin

Y, Wahyuni I. Pilot scale of Close System Compression hot press

machine. Proceedings of the Second Symposium of Indonesian

Wood Research Society, Bali, Indonesia 2010: 163–169.

Sufiandi S, Dwianto W, Darmawan T, Adi DS. Heat transfer

analysis in a production scale of Close System Compression.

Proceedings of the Second Symposium of Indonesian Wood Research

Society, Bali, Indonesia 2010: 170–174.

Sufiandi S, Kusumah SS, Wahyuni I, Amin Y. Business plan and

feasibility study of wood compression production scale. Proceedings

of the Second Symposium of Indonesian Wood Research

Society, Bali, Indonesia 2010: 175–179.

Dwianto W, Amin Y, Darmawan T, Kusumah SS, Adi DS,

Wahyuni

I, Syamani FA, Ngeljaratan LN. Development of Close

System Compression hot press machine and its compression trials.

Proceeding of International Conference of Indonesia Forestry

Researchers (INAFOR), Bogor, Indonesia 2011: 270–279.

Wahyuni I, Adi DS, Darmawan T, Sudarmanto, Dwianto W. Pengaruh

waktu pengepresan terhadap perubahan komponen kimia

kayu Durian kompresi skala pemakaian. Laporan Teknik UPT

Balai Penelitian dan Pengembangan Biomaterial LIPI 2012.

Darmawan T, Dwianto W, Amin Y, Prasetyo KW, Subiyanto B.

Karakteristik LVL lengkung dengan proses kempa dingin. Jurnal

Ilmu dan Teknologi Kayu Tropis 2009; 7(2): 62–66.

Darmawan T, Adi DS, Amin Y, Ismadi, Kusumah SS, Dwianto

W. Physical and mechanical properties of bended laminated

veneer lumber (LVL). Proceedings of the 7th International Symposium

Indonesian Wood Research Society, Bandung, Indonesia

: 271–276.

Darmawan T, Jayadi, Sudijono, Amin, Y, Wahyuni I, Dwianto W.

Modifikasi alat pelengkung kayu skala pilot dengan menggunakan

pemanas. Jurnal Ilmu dan Teknologi Kayu Tropis 2006; 4(1):

–8.

Darmawan T, Dwianto W, Amin Y, Sudarmanto, Wahyuni I.

Pengaruh suhu dan waktu pemanasan terhadap tingkat fiksasi pelengkungan

kayu Kepuk (Sterculia sp.) skala pemakaian. Prosiding

Seminar Nasional IX MAPEKI, Banjarbaru 2006: 268–273.

Sufiandi S, Darmawan T, Dwianto W. Mechanism of heat transfer

using water in wood pores during wood densification. IOP Conf.

Series: Earth and Environmental Science 374 (2019) 012013. IOP

Publishing doi:10.1088/1755-1315/374/1/012013.

Sufiandi S, Darmawan T, Dwianto W. Optical analysis of extractive

materials distribution in wood densification. IOP Conf. Series:

Earth and Environmental Science 374 (2019) 012014. IOP

Publishing doi:10.1088/1755-1315/374/1/012014.

Navi P, Pizzi A. Property changes in thermo-hydro-mechanical

processing. Holzforschung 2015; 69(7): 863–873.

Hughes M, Hill C, Pfriem A. The toughness of hygrothermally

modified wood – a review. Holzforschung 2015.

Rowell RM, Banks WB. Water repellency and dimensional stabilitty

of wood. Gen. Tech. Rep. FPL-50, Madison, WI (US): U.S.

Department of Agriculture, Forest Service, Forest Products Laboratory1985;

p.

Chen H, Lang Q, Bi Z, Miao X, Li Y, Pu J. Impregnation of poplar

wood (Populus euramericana) with methylolurea and sodium silicate

sol and induction of in-situ gel polymerization by heating.

Holzforschung 2013; 68(1): 1–8.

Khalil AHPS, Bakare IO, Khairul A, Issam AM, Bhat I. Effect

of anhydride modification on the thermal stability of cultivated

Accacia mangium. J. Wood Chem Tech 2011; 31(2): 154–171.

Buyuksari U, Akbulut T, Guler C, As N. Wettability and surface

roughness of natural and plantation-grown narrow-leaved ash.

Biores. 2011; 6(4): 4721–4730.

Darmawan W, Nandika D, Noviyanti E, Alipraja I, Lumongga D,

Gardner D, Gerardin P. Wettability and bonding quality of exterior

coating on jabon and sengon wood surfaces. J of Coat Tech

and Res. 2017; DOI:10.1007/s11998-017-9954-1

Beyer M, Weichelt F, Emmler R, Flyunt R, Beyer E, Buchmeiser

MR. ZnO-based UV nanocomposites for wood coatings in outdoor

applications. Macromol Mater Eng. 2010; 295(2): 130–136.

Clousen CA, Yang VW, Arang RA, Green F. Feasibility of nanozinc

oxide as a wood preservative. American Wood Protection Association

-Proceeding 2009; 105: 255–260.

Blanchard V, Blanchet P. Color Stability for wood products during

use: effects of inorganic nanoparticles. BioResources. 2011; 6:

–1229.

Clausen CA, Green F, Kartal SN. Weatherability and leach resistance

of wood impregnated with nano-zinc oxide. Nanoscale

Research Letters 2010; 5(9): 1464–67.

Dwianto W, Darmawan T, Jayadi, Adiana DD. Development

of bicycles with LVL curve frames. Proceeding of International

Symposium on Bioeconomics of Natural Resources Utilization

(ISBINARU), Bogor, Indonesia 2017: 586–591.

Downloads

Published

October 5, 2020

Details about this monograph

ISBN-13 (15)

978-602-496-162-6